HOW TO ATTACHED MOLLE EQUIPMENT TO YOUR GREYMAN TACTICAL (RMP) MORE EASLY. - TIP-TAP No1


Tip-Tap No1 - HOW TO ATTACHED MOLLE EQUIPMENT TO YOUR GREYMAN TACTICAL RIGID MOLLE PANEL (RMP) MORE EASLY.

- FULL DISCLOSURE -
This page contains Affiliate Links, please tap [DISCLOSURE] for details.


PARTS ASSEMBLED

THE PROBLEM

It's by-no-mean impossible to use standard issue webbing or plastic MSS (MOLLE Specific Straps) with a GREYMAN TACTICAL RMP (Rigid MOLLE Panel) but it can be difficult, especially if like me, you're swapping pouches and gear out all the time.

PLASTIC MSS (MOLLE SPECIFIC STRAPS) CAN BE TOO THICK / STIFF TO EASLY USE WITH A RMP

MORE ABOUT THE PROBLEM?

The GREYMAN TACTICAL RMP (Rigid MOLLE Panel) is 1/8' (4mm) thick making it super tough, stiff and durable but that does make it very difficult, in my experience to use some (MOLLE Specific Straps) as on one hand its difficult for them to weave in and out of the MOLLE and on the other hand it make the MOLLE ladder on the back of your pouch etc really tight due to the thickness of the MSS the RMP. so making it tough to get the MSS in.

THE SOLUTION

I use a simple 25mm webbing strap with a tri-slide buckle, the kind you might use to strap a sleeping bag to a ruck sack. You can get these really easily on Amazon.

The Hot-tip 1. Is to leave your straps long until you’ve got your pouches attached, cut the straps to a reasonable length when you’re sure you’re happy with the set-up.

Hot-tip 2. In this case the MSS are permanently attached to the pouch, DO NOT CUT THESE OFF! instead just tuck them behind the MOLLE. The MOLLE ladder needs to be loose enough to be able to thread your new straps through as well.

1-7 Pictures show how I do it.

1. NEW MOLLE STRAP THREADED BEHIND THE MOLLE LADDER

2. STRAPS INSERTED INTO THE MOLLE GRID ON THE BACK OF THE POUCH

3. L. SIDE WOVEN AND DONE, R. IN PROCESS FROM THE BOTTOM UP

4. THE WEAVING PROCESS

5. AS ABOVE CONTINUED, NEARLY DONE

6. WEAVING DONE AND BUCKLED UP - FINISHED

7. DONE AND DONE AND READY TO TAKE A HEAVY BOTTEL FULL OF WATER.

So there we have it, that's how you use a RMP with some home-made MSS. Remember, it is not impossible to use plastic or pre attached straps but sometimes it can be difficult so here's the solution.


ABOUT TIP-TAP 

This is the first in a new YOMP NOTES dept: TIP-TAP, Short, pithy posts that will talk about smaller gear configs. Again the best ideas come from you guys. I hope TIP-TAP will answer all your niggly gear mod questions. Requests always welcome : )

Thanks for reaching out and please do DM me if you need anything else.

RELATED LINKS:
RELATED POSTS:

CtA [Call to Action]

To receive a heads-up about posts just like this via your email.

- SUPPORT YOMP NOTES -
BUY SOME MERCH
If you've found the blog useful and want
to support the YOMP NOTES blog -
Buy some merch. Add to cart, Support the work.
Thank you very much.

Comments

GREYMAN TAC //AD

HELLY HANSEN //AD

VANQUEST //AD

GORUCK //AD